Strong SRT 8115 User Manual download pdf (Page 17)

PART 1 • English

manual selections 480i, 576i up to 1080p Please use a setting that matches

your TV’s speciﬁcations. After a selection is made, you will be asked to

conﬁrm. Selection above 576i is only applicable on HDMI output.

Aspect Mode: Use this option to select the aspect ratio of your TV and the preferred conversion

method. The options are: Auto (automatic detection of aspect ratio), 4:3

Panscan (Displays 16:9 widescreen broadcasts full screen on your 4:3 TV), 4:3

letterbox (black bars on top and under the picture on a 4:3 TV) and 16:9 (use

this setting for 16:9 TV sets).

Connection: Use this option to select the connection to your TV set. Select HDMI or TV

SCART. In TV Scart mode the analogue signals for RGB are available on the

TV Scart output. If HDMI is selected, only a CVBS signal is present on the TV

Scart output.

Digital Audio Output: Toggles between PCM and Bitstream output. When PCM is selected, all digital

audio will be converted to stereo audio. Bitstream enables you to listen or

transfer DolbyDigital/DolbyDigital+ audio to the TV via HDMI or to a Home

entertainment system (for example) through coaxial S/PDIF.

7.3.3 Local TimeSetting

Here you can set up your region and time zone.

Region: Use tu to select the region you live in.

GMT Usage: Set to By Region for broadcaster deﬁned time, User Deﬁne to select manual a

GMT zone or to Oﬀ to input time and date manually.

GMT Oﬀset: Allows you to adjust the time zone you live in. This option is only available

when GMT Usage is set to User Deﬁne.The GMT Oﬀset range is “-11:30 ~

+12:00”, increasing by half hours progressively. The cities matching the set

GMT Oﬀset are displayed at the bottom of the screen.

Daylight saving time: Select Oﬀ or On to add one hour extra for summer time during the summer.

Date: Date and Time settings are available only when GMT Usage is set to Oﬀ. Use

the 0~9 buttons to enter the date. Press EXIT to proceed.

Time: Date and Time settings are available only when GMT Usage is set to Oﬀ. Use

the 0~9 buttons to enter the time. Press EXIT to proceed.

Time Display Select On to display time on screen, Oﬀ to remove.

7.3.4 TimerSetting

This menu allows you to set up to 8 timed events for recording or waking up the receiver.

Use pq to select Timer Setting from the System Setup menu and press OK to enter.

The receiver will display a list with 8 timers, followed by their respective status. Select the timer you

wish to set or change with pq and press OK to proceed.

The timer setup menu will now be displayed.

The following settings are available:

Timer Mode: Choose between Oﬀ (Timer inactive), Once, Daily (Timer will be executed every

day, same time) or Weekly (Timer will be executed every week, same day, same

time) and Monthly (Timer will be executed every month, same day, same time)

Timer Service: Choose between Channel (Timer will wake up the receiver) or

Record (Timer will start to record the scheduled event).

Wakeup Channel: Use tu to select the channel the timer will wake up with.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Comments to this Manuals

No comments

Strong SRT 8115 User Manual Page 17

Comments to this Manuals

Related products and manuals for TV set-top boxes Strong SRT 8115