Strong SRT 8115 User Manual download pdf (Page 22)

PART 1 • English

English

WARNING! Formatting will permanently delete ALL data stored on the connected

device. Please make a backup copy of all data you wish to keep before

entering the HDD Format menu. STRONG cannot be held responsible for

loss of data from USB devices used with this receiver.

Press OK to proceed, select FAT or Cancel, or press EXIT to leave without formatting.

NOTE: It is possible to use USB storage devices already formatted in NTFS.

Press EXIT to leave this menu.

7.6.3 DVRSetting

This menu allows you to conﬁgure settings for Timeshift, recording and playback.

Select DVR Setting in the Media menu and press OK to enter.

Use pq to move the highlight and tu to change settings.

Timeshift: Select between Auto, Pause or Oﬀ. When Timeshift is set to Auto it will

automatically start every time after tuning to a channel. When Timeshift is set

to Pause it will start only after pressing the YELLOW/2 button. Select Oﬀ to

deactivate Timeshift.

Step to: 30 sec to 30 min. Set the time step you like to jump forward by pressing 4

during playback of recorded ﬁles. This will only work when the info banner is

displayed on screen. If it is not, press INFO.

Time Shift to Record: If set to On the timeshifted part will be included in your recording when you

start to record the current programme.

PS Record: Select between On or Oﬀ. When Oﬀ is selected, recordings will also

include subtitles and Teletext (when available). Record to PS mode On

allows recordings without these extras which will need less space on your

USB device.

Press EXIT to leave this menu.

7.6.4 Remove USB devicesafely

Select Remove USB device safely from the tools menu and press OK. The receiver will display a

message indicating that you can safely remove your storage device from the receiver.

NOTE: After performing this function, the USB device is no longer accessible from

your receiver. To gain access to your storage device again, re- insert it or

switch the receiver to standby and on again.

8.0 TROUBLESHOOTING

There may be various reasons for abnormal operation of the receiver. Check the receiver according to

the procedures shown below. If the receiver does not work properly after checking it, please contact

your dealer or the local Service Hotline. Do NOT try to open or disassemble the receiver. It may cause

a dangerous situation and warranty will be void.

1 2 ... 17 18 19 20 21 22 23 24 25

No comments

Strong SRT 8115 User Manual Page 22